PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X1336A
X1336A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.4325 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 0.5230 INCHES MINIMUM AND 0.5240 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-507-3161, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X1336A
NSN: 3110-00-507-3161
FSC: 3110
CAGE: 77260 — PIERCE CO INC THE SUB OF AVIS INDUSTRIAL CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.4325 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter0.5230 INCHES MINIMUM AND 0.5240 INCHES MAXIMUM IN
overall_outside_diameter1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-507-3161
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: X1336A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
MATERIAL: STEEL OVERALL
•
BORE SMALLEST DIAMETER: 0.5230 INCHES MINIMUM AND 0.5240 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIALSTEEL OVERALL
BORE SMALLEST DIAMETER0.5230 INCHES MINIMUM AND 0.5240 INCHES MAXIMUM IN
OVERALL HEIGHT0.4325 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
7035Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/8Interchangeable
interchangeable cross-reference
interchangeable
35FQ5A7Interchangeable
interchangeable cross-reference
interchangeable
B773333Interchangeable
interchangeable cross-reference
interchangeable
35ZInterchangeable
interchangeable cross-reference
interchangeable
DR4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X1336A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X1336A?
X1336A is a BEARING,BALL,THRUST.
What parts can replace X1336A?
There are 18 known substitutes for X1336A: 7035, AMS-QQ-A-200/8, 35FQ5A7 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X1336A?
X1336A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-507-3161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X1336A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026