PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X117
X117 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material: COPPER ALLOY, thickness: 0.812 INCHES NOMINAL IN, point_type: STANDARD, bore_diameter: 2.7530 INCHES NOMINAL IN, overall_width: 4.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X117
NSN: 5315-00-010-3386
FSC: 5315
CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialCOPPER ALLOY
thickness0.812 INCHES NOMINAL IN
point_typeSTANDARD
bore_diameter2.7530 INCHES NOMINAL IN
overall_width4.375 INCHES NOMINAL IN
overall_length5.312 INCHES NOMINAL IN
special_features2 TABS PROTRUDING OPPOSITE CLAMPING DEVICES,0.750 IN.BY 0.746 IN.;INCLUDES 2 SHIMS,2 BOLTS,AND 2 NUTS IN
style_designatorROUND SECTIONAL W/TWO EXTENDED CLAMPING DEVICES
underloop_length1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
plain_hole_diameter0.3906 INCHES NOMINAL IN
supplementary_featuresREPLACEMENT NSN 5315-00-012-0123 MS24665-355
NSN5315-00-010-3386
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X117 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 4 CLASS
•
SUPPLEMENTARY FEATURES: REPLACEMENT NSN 5315-00-012-0123 MS24665-355
•
STYLE DESIGNATOR: STANDARD
•
UNDERLOOP LENGTH: 1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
SPECIFICATION/STANDARD DATA: 81348-FF-P-386 GOVERNMENT SPECIFICATION
•
DIAMETER: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAB TYPE AND 4 CLASS
SUPPLEMENTARY FEATURESREPLACEMENT NSN 5315-00-012-0123 MS24665-355
STYLE DESIGNATORSTANDARD
UNDERLOOP LENGTH1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
SPECIFICATION/STANDARD DATA81348-FF-P-386 GOVERNMENT SPECIFICATION
DIAMETER0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
POINT TYPESTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
4368Interchangeable
interchangeable cross-reference
interchangeable
2603P11Interchangeable
interchangeable cross-reference
interchangeable
510-8Interchangeable
interchangeable cross-reference
interchangeable
C133-6Interchangeable
interchangeable cross-reference
interchangeable
709407Interchangeable
interchangeable cross-reference
interchangeable
103386Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X117?
X117 is a BRACKET,EYE,NONROTATING SHAFT.
What parts can replace X117?
There are 20 known substitutes for X117: 4368, 2603P11, 510-8 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X117?
X117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026