PartsTable
Technical Data Sheet
Download PDF

X1083NP — STAY,LOCKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

X1083NP: STAY,LOCKING.

The STAY,LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.562 INCHES NOMINAL IN, overall_length: 9.750 INCHES NOMINAL IN, style_designator: FRICTION TYPE, features_provided: RETAINING LUG, surface_treatment: COPPER ALLOY OR NICKEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-022-0405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X1083NP
NSN: 5340-01-022-0405
FSC: 5340 — Hardware, Commercial
CAGE: 3D631 — INDEPENDENT HARDWARE INC (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.562 INCHES NOMINAL IN
overall_length9.750 INCHES NOMINAL IN
offset_quantity1
style_designatorFRICTION TYPE
features_providedRETAINING LUG
surface_treatmentCOPPER ALLOY OR NICKEL
material_thickness0.095 INCHES NOMINAL IN
operational_directionLEFT-HAND
mounting_hole_diameter0.188 INCHES NOMINAL IN
NSN5340-01-022-0405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X1083NP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: LEFT-HAND
•
STYLE DESIGNATOR: FRICTION TYPE
•
MOUNTING HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
OFFSET QUANTITY: 1
•
FEATURES PROVIDED: RETAINING LUG
•
MATERIAL THICKNESS: 0.095 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONLEFT-HAND
STYLE DESIGNATORFRICTION TYPE
MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL IN
OVERALL LENGTH9.750 INCHES NOMINAL IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
OFFSET QUANTITY1
FEATURES PROVIDEDRETAINING LUG
MATERIAL THICKNESS0.095 INCHES NOMINAL IN
SURFACE TREATMENTCOPPER ALLOY OR NICKEL
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2-03-1-7108Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X1083NP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X1083NP?
X1083NP is a STAY,LOCKING.
What parts can replace X1083NP?
There is 1 known substitute for X1083NP: 2-03-1-7108. Substitute compatibility should be verified for your specific system.
What is the NSN for X1083NP?
X1083NP is cataloged in the U.S. Government catalog under NSN 5340-01-022-0405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X1083NP