PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X1014T82
X1014T82 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS CORE, outside_diameter: 2.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.281 INCHES NOMINAL IN, maximum_pressure_rating: 200.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-187-7386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X1014T82
NSN: 5330-00-187-7386
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialASBESTOS CORE
outside_diameter2.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.281 INCHES NOMINAL IN
maximum_pressure_rating200.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
nondefinitive_spec/std_data1 TYPE
NSN5330-00-187-7386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X1014T82 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 2.281 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MAXIMUM PRESSURE RATING: 200.0 POUNDS PER SQUARE INCH (PSI) LBS
•
MATERIAL: ASBESTOS AND COPPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER2.281 INCHES NOMINAL IN
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.078 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE
MAXIMUM PRESSURE RATING200.0 POUNDS PER SQUARE INCH (PSI) LBS
MATERIALASBESTOS AND COPPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
X1014T82Interchangeable
interchangeable cross-reference
interchangeable
100186Interchangeable
interchangeable cross-reference
interchangeable
92S211Interchangeable
Same NIIN cross-reference
interchangeable
HHG101TYPE1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X1014T82?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X1014T82?
X1014T82 is a GASKET.
What parts can replace X1014T82?
There are 4 known substitutes for X1014T82: X1014T82, 100186, 92S211 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X1014T82?
X1014T82 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-187-7386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X1014T82

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026