PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X10-89

X10-89 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, outside_diameter: 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-011-5548, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X10-89
NSN: 5310-00-011-5548
FSC: 5310
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
hole_diameter0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
outside_diameter0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
NSN5310-00-011-5548
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X10-89 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
TECHNICAL CHARACTERISTICS
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
LENS,P0.25,6BC,71MM DIAInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
P0.25 SPHEREInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
P25InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11662117InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10116602InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3F-9556InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy X10-89?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X10-89?
X10-89 is a WASHER,LOCK.
What parts can replace X10-89?
There are 23 known substitutes for X10-89: LENS,P0.25,6BC,71MM DIA, P0.25 SPHERE, P25 and 20 more. Substitute compatibility should be verified for your specific system.
Is X10-89 still available?
X10-89 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X10-89

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026