PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X01P
X01P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC TETRAFLUOROETHYLENE OVERALL, rim_surface_width: 0.156 INCHES NOMINAL IN, peripheral_diameter: 0.859 INCHES NOMINAL IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-070-0067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X01P
NSN: 5330-01-070-0067
FSC: 5330
CAGE: 11859 — HUNT VALVE COMPANY, INC. (USA)
SPECIFICATIONS
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
rim_surface_width0.156 INCHES NOMINAL IN
peripheral_diameter0.859 INCHES NOMINAL IN
center_hole_diameter0.500 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-01-070-0067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X01P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.156 INCHES NOMINAL IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: V
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.859 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.156 INCHES NOMINAL IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLEV
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.859 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
170201-3VInterchangeable
interchangeable cross-reference
interchangeable
5A15Interchangeable
interchangeable cross-reference
interchangeable
P5VST107Interchangeable
interchangeable cross-reference
interchangeable
P-5-VInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X01P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X01P?
X01P is a RETAINER,PACKING.
What parts can replace X01P?
There are 4 known substitutes for X01P: 170201-3V, 5A15, P5VST107 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X01P?
X01P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-070-0067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X01P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026