PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X-REC
X-REC ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303SE OR STEEL COMP 316.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-021-2294, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X-REC
NSN: 5305-01-021-2294
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303SE OR STEEL COMP 316
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength75000 POUNDS PER SQUARE INCH LBS
NSN5305-01-021-2294
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: X-REC · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC ALL MATERIAL RESPONSES
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HEAD DIAMETER0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS2A A
THREAD LENGTH0.657 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SCREW SURFACE TREATMENTPASSIVATE
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AN515C-8-12Interchangeable
interchangeable cross-reference
interchangeable
112-0782-047Interchangeable
interchangeable cross-reference
interchangeable
0453-279Interchangeable
interchangeable cross-reference
interchangeable
MS51957-47Interchangeable
Same NIIN cross-reference
interchangeable
NO.8-32UNC-2A,3 /4"LG,CRES 316Interchangeable
Same NIIN cross-reference
interchangeable
4912525-06Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X-REC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X-REC?
X-REC is a SCREW,MACHINE.
What parts can replace X-REC?
There are 6 known substitutes for X-REC: AN515C-8-12, 112-0782-047, 0453-279 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X-REC?
X-REC is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-021-2294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X-REC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026