PartsTable
Technical Data Sheet
Download PDF

X-FLW-BRS-10 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

X-FLW-BRS-10: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY AND ZINC ALLOY OVERALL, thickness: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN, overall_diameter: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, special_features: OEM COMSACO INC;3737 E.VIRGINIA BEACH BLVD;NORFOLK, VA;PHONE: 757-466-9188, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-646-6710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X-FLW-BRS-10
NSN: 5310-01-646-6710
FSC: 5310 — Nuts and Washers
CAGE: 57626 — COMSACO, LLC DBA COMSACO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY AND ZINC ALLOY OVERALL
thickness0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
overall_diameter0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
special_featuresOEM COMSACO INC;3737 E.VIRGINIA BEACH BLVD;NORFOLK, VA;PHONE: 757-466-9188
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationSWITCH ASSY E
cross-sectional_shape_styleBLANK RECTANGULAR
part_name_assigned_by_controlling_agencyWASHER FLAT
NSN5310-01-646-6710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X-FLW-BRS-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: BLANK RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY AND ZINC ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEBLANK RECTANGULAR
SPECIAL FEATURESOEM COMSACO INC;3737 E.VIRGINIA BEACH BLVD;NORFOLK, VA;PHONE: 757-466-9188
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER FLAT
END ITEM IDENTIFICATIONSWITCH ASSY E
MATERIALCOPPER ALLOY AND ZINC ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
404-416Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy X-FLW-BRS-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X-FLW-BRS-10?
X-FLW-BRS-10 is a WASHER,FLAT.
What parts can replace X-FLW-BRS-10?
There is 1 known substitute for X-FLW-BRS-10: 404-416. Substitute compatibility should be verified for your specific system.
What is the NSN for X-FLW-BRS-10?
X-FLW-BRS-10 is cataloged in the U.S. Government catalog under NSN 5310-01-646-6710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X-FLW-BRS-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.