PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X-67-125
X-67-125 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include fastener_length: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, end_item_identification: GENERATOR SET, DIESEL ENGINE, nonmachine_nominal_thread_diameter: 0.179 INCHES IN, part_name_assigned_by_controlling_agency: SCREW HEX WASHER THREAD FORMING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-477-2051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X-67-125
NSN: 5305-01-477-2051
FSC: 5305
CAGE: 67271 — KOHLER CO. (USA)
SPECIFICATIONS
fastener_length1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
end_item_identificationGENERATOR SET, DIESEL ENGINE
nonmachine_nominal_thread_diameter0.179 INCHES IN
part_name_assigned_by_controlling_agencySCREW HEX WASHER THREAD FORMING
NSN5305-01-477-2051
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: X-67-125 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.179 INCHES IN
•
FASTENER LENGTH: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NONMACHINE NOMINAL THREAD DIAMETER0.179 INCHES IN
FASTENER LENGTH1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AA50563-101AXXXFInterchangeable
interchangeable cross-reference
interchangeable
TYPE I DESIGN 1 STYLE XInterchangeable
interchangeable cross-reference
interchangeable
A-A-50563Interchangeable
interchangeable cross-reference
interchangeable
70-207Interchangeable
interchangeable cross-reference
interchangeable
X67Interchangeable
interchangeable cross-reference
interchangeable
17089Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X-67-125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X-67-125?
X-67-125 is a SCREW,ASSEMBLED WASHER.
What parts can replace X-67-125?
There are 8 known substitutes for X-67-125: AA50563-101AXXXF, TYPE I DESIGN 1 STYLE X, A-A-50563 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X-67-125?
X-67-125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-477-2051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X-67-125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026