PartsTable
Technical Data Sheet
PartsTable / MRO / X-275
X-275 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL COMP B1112 OVERALL, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, first_end_style: OVAL, special_features: STANDARD DRIVER BOAR FOR ENGRAVEING MACHINE, style_designator: TWO PIECE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-543-9236, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ X-275
NSN: 5998-01-543-9236
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 0Z686 — XENETECH GLOBAL, INC. DBA XENETECH (USA)
SPECIFICATIONS
materialSTEEL COMP B1112 OVERALL
overall_width0.750 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
first_end_styleOVAL
special_featuresSTANDARD DRIVER BOAR FOR ENGRAVEING MACHINE
style_designatorTWO PIECE
precious_materialSILVER
first_end_locationBOTH ENDS
material_thickness0.280 INCHES NOMINAL IN
loop_inside_diameter2.880 INCHES NOMINAL IN
pin_large_end_diameter0.131 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
pin_small_end_diameter0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
NSN5998-01-543-9236
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN X-275 MFR RESISTOR,VARIABLE,WIRE WOUND,NON
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONXENETECH 1313-250C ENGRAVEING MACHINE
SPECIAL FEATURESSTANDARD DRIVER BOAR FOR ENGRAVEING MACHINE
PART NAME ASSIGNED BY CONTROLLING AGENCYDRIVER BOARD
END ITEM IDENTIFICATIONXENETECH 1313-250C ENGRAVEING MACHINE
SPECIAL FEATURESSTANDARD DRIVER BOAR FOR ENGRAVEING MACHINE
PART NAME ASSIGNED BY CONTROLLING AGENCYDRIVER BOARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3439PL2088524Interchangeable
interchangeable cross-reference
interchangeable
HS-30AInterchangeable
interchangeable cross-reference
interchangeable
30AInterchangeable
interchangeable cross-reference
interchangeable
X275Interchangeable
interchangeable cross-reference
interchangeable
26425AXInterchangeable
interchangeable cross-reference
interchangeable
X278.5-RInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy X-275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X-275?
X-275 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace X-275?
There are 6 known substitutes for X-275: 3439PL2088524, HS-30A, 30A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X-275?
X-275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-543-9236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X-275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026