PartsTable / COMPONENT / X-271-27
X-271-27
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 1.503 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-083-7714, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
X-271-27
NSN: 5330-00-083-7714 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN temp_rating -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF outside_diameter 1.503 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.125 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-083-7714
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: X-271-27
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• HOUSING BORE DIAMETER: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
• OUTSIDE DIAMETER: 1.503 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR HOUSING BORE DIAMETER 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN ACCOMMODATED SHAFT DIAMETER 1.125 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE TEMP RATING -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF OUTSIDE DIAMETER 1.503 INCHES NOMINAL IN CASE STYLE SQUARE SEAL WIDTH 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN SURFACE TREATMENT PLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
67-5-4 Interchangeable interchangeable cross-reference
interchangeable
5213 Interchangeable interchangeable cross-reference
interchangeable
J246 Interchangeable interchangeable cross-reference
interchangeable
AC294 Interchangeable interchangeable cross-reference
interchangeable
4 Interchangeable interchangeable cross-reference
interchangeable
11004 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy X-271-27?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X-271-27?
X-271-27 is a SEAL,PLAIN ENCASED.
What parts can replace X-271-27?
There are 21 known substitutes for X-271-27: 67-5-4, 5213, J246 and 18 more. Substitute compatibility should be verified for your specific system.
Is X-271-27 still available?
X-271-27 is currently cancelled.
Request a Quote — X-271-27