PartsTable
Technical Data Sheet
Download PDF

WY7954 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

WY7954: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR W/BUSHING, body_width: 0.625 INCHES NOMINAL IN, body_height: 0.750 INCHES NOMINAL IN, body_length: 0.359 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-056-6563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ WY7954
NSN: 5905-01-056-6563
FSC: 5905 — Resistor
CAGE: 11236 — CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP (USA)
SPECIFICATIONS
body_styleRECTANGULAR W/BUSHING
body_width0.625 INCHES NOMINAL IN
body_height0.750 INCHES NOMINAL IN
body_length0.359 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
device_design_typeNONTURN AT 9:00 OCLOCKUNABLE TO DECODE
NSN5905-01-056-6563
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN WY7954 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 5.0 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 85.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
NONTURN DEVICE RADIUS: 0.312 INCHES NOMINAL IN
•
BODY STYLE: RECTANGULAR W/BUSHING
•
MOUNTING METHOD: STANDARD BUSHING
TECHNICAL CHARACTERISTICS
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.125 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.312 INCHES NOMINAL IN
BODY STYLERECTANGULAR W/BUSHING
MOUNTING METHODSTANDARD BUSHING
BODY WIDTH0.625 INCHES NOMINAL IN
BODY HEIGHT0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1000373-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy WY7954?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WY7954?
WY7954 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace WY7954?
There is 1 known substitute for WY7954: 1000373-01. Substitute compatibility should be verified for your specific system.
What is the NSN for WY7954?
WY7954 is cataloged in the U.S. Government catalog under NSN 5905-01-056-6563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WY7954

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.