PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WX6252
WX6252 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.254 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.594 INCHES NOMINAL IN, overall_width: 0.562 INCHES NOMINAL IN, tongue_length: 0.187 INCHES NOMINAL IN, overall_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-390-6409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WX6252
NSN: 5340-00-390-6409
FSC: 5340
CAGE: 01930 — AMEROCK CORP P O BOX 900 FREEPORT IL 61032-0900 (USA)
SPECIFICATIONS
height0.254 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.594 INCHES NOMINAL IN
overall_width0.562 INCHES NOMINAL IN
tongue_length0.187 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
material_thickness0.062 INCHES NOMINAL IN
first_surface_hole_size0.128 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-00-390-6409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WX6252 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
TONGUE WIDTH: 0.594 INCHES NOMINAL IN
•
TONGUE LENGTH: 0.187 INCHES NOMINAL IN
•
FIRST SURFACE HOLE QUANTITY: 2
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
HEIGHT: 0.254 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.875 INCHES NOMINAL IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
TONGUE WIDTH0.594 INCHES NOMINAL IN
TONGUE LENGTH0.187 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
MOUNTING FACILITYUNTHREADED HOLE(S)
HEIGHT0.254 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE SIZE0.128 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6051Upgraded Successor
successor cross-reference
successor
13360Upgraded Successor
successor cross-reference
successor
131060Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WX6252?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WX6252?
WX6252 is a STRIKE,CATCH.
What parts can replace WX6252?
There are 3 known substitutes for WX6252: 6051, 13360, 131060. Substitute compatibility should be verified for your specific system.
What is the NSN for WX6252?
WX6252 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-390-6409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WX6252

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026