PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WWD352HS
WWD352HS ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 201 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, inside_diameter: 10.063 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN, special_features: INNER BAND SHOE FOR SOFT MATERIALS, style_designator: WIRE, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-338-1162, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WWD352HS
NSN: 4730-01-338-1162
FSC: 4730
CAGE: 66295 — WITTEK COMPANIES INTL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 201 OVERALL
overall_width0.500 INCHES NOMINAL IN
inside_diameter10.063 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN
special_featuresINNER BAND SHOE FOR SOFT MATERIALS
style_designatorWIRE
surface_treatmentPASSIVATE OVERALL
fastening_device_typeSLOTTED HEXAGON HEAD SCREW
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE SCREW
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN4730-01-338-1162
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: WWD352HS · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE SCREW
•
STYLE DESIGNATOR: WIRE
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 201 OVERALL
•
FASTENING DEVICE TYPE: SLOTTED HEXAGON HEAD SCREW
•
INSIDE DIAMETER: 10.063 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE SCREW
STYLE DESIGNATORWIRE
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 201 OVERALL
FASTENING DEVICE TYPESLOTTED HEXAGON HEAD SCREW
INSIDE DIAMETER10.063 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410 SCREW
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR 66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
94164Interchangeable
interchangeable cross-reference
interchangeable
1424 1 IN.Interchangeable
interchangeable cross-reference
interchangeable
190 1 IN.Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
9D0021Interchangeable
Same NIIN cross-reference
interchangeable
2948-352Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WWD352HS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WWD352HS?
WWD352HS is a CLAMP,HOSE.
What parts can replace WWD352HS?
There are 7 known substitutes for WWD352HS: 94164, 1424 1 IN., 190 1 IN. and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WWD352HS?
WWD352HS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-338-1162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WWD352HS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026