PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WWD244HS
WWD244HS ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BAND, overall_width: 0.530 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, inside_diameter: 6.750 INCHES MINIMUM AND 7.620 INCHES MAXIMUM IN, special_features: ITEM AKA: CLAMP,HOSE-WORM DRIVE, WITH LINER,CRES, style_designator: WIRE, surface_treatment: PASSIVATE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-534-1372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WWD244HS
NSN: 4730-01-534-1372
FSC: 4730
CAGE: 66295 — WITTEK COMPANIES INTL INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BAND
overall_width0.530 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
inside_diameter6.750 INCHES MINIMUM AND 7.620 INCHES MAXIMUM IN
special_featuresITEM AKA: CLAMP,HOSE-WORM DRIVE, WITH LINER,CRES
style_designatorWIRE
surface_treatmentPASSIVATE BAND
fastening_device_typePLAIN SLOTTED HEAD SCREW
end_item_identificationAIRCRAFT, HERCULES C-130
material_document_and_classificationFED-STD-66 FED STD 1ST MATERIAL RESPONSE OR AMS5901, 5516 ASSN STD 1ST MATERIAL RESPONSE BAND
surface_treatment_document_and_classificationAMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE BAND
NSN4730-01-534-1372
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: WWD244HS · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 6.750 INCHES MINIMUM AND 7.620 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE BAND
•
FASTENING DEVICE TYPE: PLAIN SLOTTED HEAD SCREW
•
STYLE DESIGNATOR: WIRE
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66 FED STD 1ST MATERIAL RESPONSE OR AMS5901, 5516 ASSN STD 1ST MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAIRCRAFT, HERCULES C-130
INSIDE DIAMETER6.750 INCHES MINIMUM AND 7.620 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE BAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE BAND
FASTENING DEVICE TYPEPLAIN SLOTTED HEAD SCREW
STYLE DESIGNATORWIRE
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD 1ST MATERIAL RESPONSE OR AMS5901, 5516 ASSN STD 1ST MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-S-763 ASSN STD 2ND MATERIAL RESPONSE OR FED-STD-66 FED STD 2ND MATERIAL RESPONSE SCREW
MATERIALSTEEL CORROSION RESISTING BAND
SPECIAL FEATURESITEM AKA: CLAMP,HOSE-WORM DRIVE, WITH LINER,CRES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
94114Interchangeable
interchangeable cross-reference
interchangeable
352143Interchangeable
interchangeable cross-reference
interchangeable
94114-1Interchangeable
interchangeable cross-reference
interchangeable
9D0021-244Interchangeable
Same NIIN cross-reference
interchangeable
HK92C21-244Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WWD244HS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WWD244HS?
WWD244HS is a CLAMP,HOSE.
What parts can replace WWD244HS?
There are 5 known substitutes for WWD244HS: 94114, 352143, 94114-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WWD244HS?
WWD244HS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-534-1372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WWD244HS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026