PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WWD240HS
WWD240HS ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, overall_width: 0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, inside_diameter: 6.562 INCHES MINIMUM AND 7.500 INCHES MAXIMUM IN, special_features: WEAPON SYSTEM ESSENTIAL, style_designator: WIRE, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-016-9968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WWD240HS
NSN: 4730-01-016-9968
FSC: 4730
CAGE: 66295 — WITTEK COMPANIES INTL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
overall_width0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
inside_diameter6.562 INCHES MINIMUM AND 7.500 INCHES MAXIMUM IN
special_featuresWEAPON SYSTEM ESSENTIAL
style_designatorWIRE
surface_treatmentPASSIVATE OVERALL
fastening_device_typeSLOTTED HEXAGON HEAD SCREW
end_item_identificationAIRCRAFT, AIRLIFTER C-17A A
criticality_code_justificationFEAT
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN4730-01-016-9968
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: WWD240HS · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 302 OVERALL
•
STYLE DESIGNATOR: WIRE
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAIRCRAFT, AIRLIFTER C-17A A
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 302 OVERALL
STYLE DESIGNATORWIRE
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE SCREW
OVERALL WIDTH0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
FASTENING DEVICE TYPESLOTTED HEXAGON HEAD SCREW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
94112Interchangeable
interchangeable cross-reference
interchangeable
2411 1/2Interchangeable
interchangeable cross-reference
interchangeable
2501 1/2Interchangeable
interchangeable cross-reference
interchangeable
53532Interchangeable
interchangeable cross-reference
interchangeable
9411-40-2Interchangeable
interchangeable cross-reference
interchangeable
9411-40-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WWD240HS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WWD240HS?
WWD240HS is a CLAMP,HOSE.
What parts can replace WWD240HS?
There are 11 known substitutes for WWD240HS: 94112, 2411 1/2, 2501 1/2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WWD240HS?
WWD240HS is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-016-9968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WWD240HS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026