PartsTable
Technical Data Sheet
Download PDF

WW19 — POINTER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

WW19: POINTER.

The POINTER is a the manufacturer industrial component. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN, end_item_identification: GAGE, WATER STAGE, WIRE WEIGHT, TYPE A, open_end_inside_diameter: 1.807 INCHES NOMINAL IN, closed_end_overall_diameter: 1.730 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-685-0707, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WW19
NSN: 5340-00-685-0707
NIINs: 006850707, 009185192
FSC: 5340 — Hardware, Commercial
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
length_under_shoulder0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
end_item_identificationGAGE, WATER STAGE, WIRE WEIGHT, TYPE A
open_end_inside_diameter1.807 INCHES NOMINAL IN
closed_end_overall_diameter1.730 INCHES NOMINAL IN
NSN5340-00-685-0707
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WW19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.730 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 1.807 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.730 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
OPEN END INSIDE DIAMETER1.807 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
SUBSTITUTES & CROSS-REFERENCES 3
129-900-064Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
524741-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1819828Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy WW19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WW19?
WW19 is a POINTER.
What parts can replace WW19?
There are 3 known substitutes for WW19: 129-900-064, 524741-25, 1819828. Substitute compatibility should be verified for your specific system.
What is the NSN for WW19?
WW19 is cataloged in the U.S. Government catalog under NSN 5340-00-685-0707. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WW19