PartsTable
Technical Data Sheet
Download PDF

WW17 — PULLEY,GROOVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

WW17: PULLEY,GROOVE.

The PULLEY,GROOVE is a the manufacturer industrial component. Key specifications include material: PLASTIC, length_under_shoulder: 0.625 INCHES NOMINAL IN, end_item_identification: GAGE, WATER STAGE, WIRE WEIGHT, TYPE A (ILLUSTRATED), open_end_inside_diameter: 1.528 INCHES NOMINAL IN, closed_end_overall_diameter: 1.452 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-826-5688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WW17
NSN: 5340-00-826-5688
NIINs: 008265688, 009185034
FSC: 5340 — Hardware, Commercial
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialPLASTIC
length_under_shoulder0.625 INCHES NOMINAL IN
end_item_identificationGAGE, WATER STAGE, WIRE WEIGHT, TYPE A (ILLUSTRATED)
open_end_inside_diameter1.528 INCHES NOMINAL IN
closed_end_overall_diameter1.452 INCHES NOMINAL IN
NSN5340-00-826-5688
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WW17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.452 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.625 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 1.528 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.452 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.625 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.528 INCHES NOMINAL IN
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 1
GS10431+28Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy WW17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WW17?
WW17 is a PULLEY,GROOVE.
What parts can replace WW17?
There is 1 known substitute for WW17: GS10431+28. Substitute compatibility should be verified for your specific system.
What is the NSN for WW17?
WW17 is cataloged in the U.S. Government catalog under NSN 5340-00-826-5688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WW17