PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WW-T-775
WW-T-775 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include diameter: 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN, material: COPPER, construction: SEAMLESS, heat_treatment: DRAWN TEMPER, wall_thickness: 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, first_end_style: PLAIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-00-027-9510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WW-T-775
NSN: 4710-00-027-9510
FSC: 4710
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
diameter0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
materialCOPPER
constructionSEAMLESS
heat_treatmentDRAWN TEMPER
wall_thickness0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
first_end_stylePLAIN
special_features50 FT COIL,SOFT TEMPER FT
features_providedCOILED
operating_pressure1225.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
maximum_operating_temp240.4 CELSIUS DEGC
end_item_identificationGRUMMAN A10 AIRCRAFT
cross-sectional_shape_stylePLAIN ROUND
NSN4710-00-027-9510
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: WW-T-775 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONSTRUCTION: SEAMLESS
•
NONDEFINITIVE SPEC/STD DATA: 50 FT COIL FORM FT
•
FEATURES PROVIDED: ENDS SEALED FOR REFRIGERATION SERVICE
•
MATERIAL: COPPER
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
HEAT TREATMENT: ANNEALED
•
WALL THICKNESS: 0.032 INCHES NOMINAL IN
•
MEASURING METHOD AND LENGTH: 600.000 INCHES NOMINAL SPECIFIC IN
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTIONSEAMLESS
NONDEFINITIVE SPEC/STD DATA50 FT COIL FORM FT
FEATURES PROVIDEDENDS SEALED FOR REFRIGERATION SERVICE
MATERIALCOPPER
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
HEAT TREATMENTANNEALED
WALL THICKNESS0.032 INCHES NOMINAL IN
MEASURING METHOD AND LENGTH600.000 INCHES NOMINAL SPECIFIC IN
CROSS-SECTIONAL SHAPE STYLEPLAIN ROUND
DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES

No verified substitutes available.

LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WW-T-775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WW-T-775?
WW-T-775 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What is the NSN for WW-T-775?
WW-T-775 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4710-00-027-9510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WW-T-775

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026