PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WVS-2232-P20
WVS-2232-P20 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CORROSION RESISTING BODY, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, body_height: 5.312 INCHES NOMINAL IN, body_length: 0.625 INCHES NOMINAL IN, current_type: DC, power_rating: 2.0 WATTS AVERAGE AND 0.3 KILOWATTS PEAK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-396-1813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WVS-2232-P20
NSN: 3110-01-396-1813
FSC: 3110
CAGE: D8835 — REINTJES GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
body_height5.312 INCHES NOMINAL IN
body_length0.625 INCHES NOMINAL IN
current_typeDC
power_rating2.0 WATTS AVERAGE AND 0.3 KILOWATTS PEAK
shank_length1.919 INCHES NOMINAL IN
thread_class2A A
overall_width4.880 INCHES MINIMUM AND 5.120 INCHES MAXIMUM IN
terminal_typeTAB, SOLDER LUG
thread_length0.750 INCHES MINIMUM IN
overall_height3.350 INCHES MINIMUM AND 3.590 INCHES MAXIMUM IN
NSN3110-01-396-1813
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WVS-2232-P20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
7716Interchangeable
interchangeable cross-reference
interchangeable
JK1001-1BLACKInterchangeable
interchangeable cross-reference
interchangeable
889BInterchangeable
interchangeable cross-reference
interchangeable
45E53Interchangeable
interchangeable cross-reference
interchangeable
DC17Interchangeable
interchangeable cross-reference
interchangeable
DC8-2500KCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WVS-2232-P20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WVS-2232-P20?
WVS-2232-P20 is a BEARING,ROLLER,TAPERED.
What parts can replace WVS-2232-P20?
There are 18 known substitutes for WVS-2232-P20: 7716, JK1001-1BLACK, 889B and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WVS-2232-P20?
WVS-2232-P20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-396-1813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WVS-2232-P20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026