PartsTable
Technical Data Sheet
Download PDF

WU16480 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

WU16480: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-515-7204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WU16480
NSN: 5305-00-515-7204
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentNICKEL
thread_quantity_per_inch48
NSN5305-00-515-7204
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: WU16480 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: NICKEL
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTNICKEL
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD LENGTH0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY MATERIAL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIALCOPPER ALLOY
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 1
FF-S-92B TY I ST 2SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy WU16480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WU16480?
WU16480 is a SCREW,MACHINE.
What parts can replace WU16480?
There is 1 known substitute for WU16480: FF-S-92B TY I ST 2S. Substitute compatibility should be verified for your specific system.
What is the NSN for WU16480?
WU16480 is cataloged in the U.S. Government catalog under NSN 5305-00-515-7204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WU16480

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.