PartsTable
Technical Data Sheet
Download PDF

WTB36QR — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

WTB36QR: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, special_features: EQUAL NO. HOLES LOCATED ON TWO CENTER LINES, bolt_hole_quantity: 36, cross-sectional_thickness: 0.040 INCHES NOMINAL IN, material_document_and_classification: ZZ-R-765,CLASS 2B,GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL, outside_edge_to_bolt_hole_center_distance_along_width: 0.075 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-268-0180, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WTB36QR
NSN: 5330-01-268-0180
FSC: 5330 — Packing and Gasket Materials
CAGE: 10400 — AIRBORN INTERCONNECT, LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
special_featuresEQUAL NO. HOLES LOCATED ON TWO CENTER LINES
bolt_hole_quantity36
cross-sectional_thickness0.040 INCHES NOMINAL IN
material_document_and_classificationZZ-R-765,CLASS 2B,GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.075 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-268-0180
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WTB36QR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.040 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765,CLASS 2B,GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
BOLT HOLE QUANTITY: 36
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.075 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.040 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765,CLASS 2B,GRADE 40 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
BOLT HOLE QUANTITY36
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESEQUAL NO. HOLES LOCATED ON TWO CENTER LINES
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.075 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
704AS9832Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
704AS9832-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WTB36QR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WTB36QR?
WTB36QR is a GASKET.
What parts can replace WTB36QR?
There are 2 known substitutes for WTB36QR: 704AS9832, 704AS9832-1. Substitute compatibility should be verified for your specific system.
What is the NSN for WTB36QR?
WTB36QR is cataloged in the U.S. Government catalog under NSN 5330-01-268-0180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WTB36QR

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.