PartsTable
Technical Data Sheet
Download PDF

WSS94501 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

WSS94501: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, overall_width: 23.815 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN, aperture_width: 23.845 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN, overall_length: 44.560 INCHES MINIMUM AND 44.650 INCHES MAXIMUM IN, bolt_hole_quantity: 52, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-055-1992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WSS94501
NSN: 5330-01-055-1992
FSC: 5330 — Packing and Gasket Materials
CAGE: 10855 — CARRIER CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
overall_width23.815 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN
aperture_width23.845 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN
overall_length44.560 INCHES MINIMUM AND 44.650 INCHES MAXIMUM IN
bolt_hole_quantity52
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
nuclear_hardness_critical_featureHARDENED
outside_edge_to_bolt_hole_center_distance_along_width0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5330-01-055-1992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WSS94501 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 23.845 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 52
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OVERALL LENGTH44.560 INCHES MINIMUM AND 44.650 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH23.815 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN
APERTURE WIDTH23.845 INCHES MINIMUM AND 23.905 INCHES MAXIMUM IN
BOLT HOLE QUANTITY52
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
NUCLEAR HARDNESS CRITICAL FEATUREHARDENED
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy WSS94501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WSS94501?
WSS94501 is a GASKET.
What is the NSN for WSS94501?
WSS94501 is cataloged in the U.S. Government catalog under NSN 5330-01-055-1992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WSS94501

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.