WSI-332-30D — NUT,SELF-LOCKING,PLATE

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

WSI-332-30D: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL EXCEPT INSERT, nut_style: PLATE, nut_height: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, nut_length: 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN, plate_width: 1.570 INCHES MAXIMUM IN, temp_rating: 300.0 FAHRENHEIT MAXIMUM DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-132-3392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

WSI-332-30D

NSN: 5310-01-132-3392
FSC: 5310 — Nuts and Washers
CAGE: 04169 — ATLAS CORP WESTERN SKY INDUSTRIES DIV (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL EXCEPT INSERT
nut_style	PLATE
nut_height	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
nut_length	0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
plate_width	1.570 INCHES MAXIMUM IN
temp_rating	300.0 FAHRENHEIT MAXIMUM DEGF
thread_class	2B
thread_series	UNF
locking_feature	PREVAILING TORQUE ALL METAL DESIGN
plate_thickness	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	CHROMATE NUT
NSN	5310-01-132-3392

COMPONENT DIAGRAM

KEY FEATURES

•

PLATE THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

NUT LENGTH: 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT

•

DISTANCE FROM MOUNTING HOLE CENTER TO BASE: 0.250 INCHES MINIMUM IN

•

THREAD SERIES: UNF

•

PLATE WIDTH: 1.570 INCHES MAXIMUM IN

•

TEMP RATING: 300.0 FAHRENHEIT MAXIMUM DEGF

•

MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES

TECHNICAL CHARACTERISTICS

PLATE THICKNESS	0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NUT LENGTH	0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT
DISTANCE FROM MOUNTING HOLE CENTER TO BASE	0.250 INCHES MINIMUM IN
THREAD SERIES	UNF
PLATE WIDTH	1.570 INCHES MAXIMUM IN
TEMP RATING	300.0 FAHRENHEIT MAXIMUM DEGF
MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE	0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 7245 ASSN STD SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 2

ST4M132-3-30Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

10109637Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy WSI-332-30D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is WSI-332-30D?

WSI-332-30D is a NUT,SELF-LOCKING,PLATE.

What parts can replace WSI-332-30D?

There are 2 known substitutes for WSI-332-30D: ST4M132-3-30, 10109637. Substitute compatibility should be verified for your specific system.

What is the NSN for WSI-332-30D?

WSI-332-30D is cataloged in the U.S. Government catalog under NSN 5310-01-132-3392. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

WSI-332-30D — NUT,SELF-LOCKING,PLATE

Request a Quote — WSI-332-30D