PartsTable
Technical Data Sheet
Download PDF

WS9030PCS20-21 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

WS9030PCS20-21: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL CUP, cup_width: 1.2500 INCHES NOMINAL IN, cone_width: 1.6250 INCHES NOMINAL IN, bore_diameter: 2.7500 INCHES NOMINAL IN, overall_width: 1.6250 INCHES NOMINAL IN, standout_width: 0.3750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-101-4181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WS9030PCS20-21
NSN: 3110-00-101-4181
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 11708 — CARROLL ENGINEERING CO (USA)
SPECIFICATIONS
materialSTEEL CUP
cup_width1.2500 INCHES NOMINAL IN
cone_width1.6250 INCHES NOMINAL IN
bore_diameter2.7500 INCHES NOMINAL IN
overall_width1.6250 INCHES NOMINAL IN
standout_width0.3750 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1300 INCHES NOMINAL IN
overall_outside_diameter5.7500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 4
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE CUP
NSN3110-00-101-4181
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WS9030PCS20-21 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE CUP
•
OVERALL OUTSIDE DIAMETER: 5.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1300 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.2500 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE CUP
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE CONE
OVERALL WIDTH1.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER5.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1300 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.3750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
WS9030-20-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
655-653Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-187Reference document
Same NSN cross-reference
Reference document — Identification reference
MS19081-254Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
14656-442Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy WS9030PCS20-21?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WS9030PCS20-21?
WS9030PCS20-21 is a BEARING,ROLLER,TAPERED.
What parts can replace WS9030PCS20-21?
There are 5 known substitutes for WS9030PCS20-21: WS9030-20-21, 655-653, FF-B-187 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WS9030PCS20-21?
WS9030PCS20-21 is cataloged in the U.S. Government catalog under NSN 3110-00-101-4181. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WS9030PCS20-21

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.