PartsTable
Technical Data Sheet
Download PDF

WS-9273 PC 60 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WS-9273 PC 60: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, hole_diameter: 0.531 INCHES NOMINAL IN, overall_diameter: 1.062 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-465-7754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WS-9273 PC 60
NSN: 5310-01-465-7754
FSC: 5310 — Nuts and Washers
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
hole_diameter0.531 INCHES NOMINAL IN
overall_diameter1.062 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationNIMITZ CLASS CVN
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-465-7754
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WS-9273 PC 60 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONNIMITZ CLASS CVN
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.531 INCHES NOMINAL IN
THICKNESS0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
WS-9273Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WS-9273 PC 60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WS-9273 PC 60?
WS-9273 PC 60 is a WASHER,FLAT.
What parts can replace WS-9273 PC 60?
There is 1 known substitute for WS-9273 PC 60: WS-9273. Substitute compatibility should be verified for your specific system.
What is the NSN for WS-9273 PC 60?
WS-9273 PC 60 is cataloged in the U.S. Government catalog under NSN 5310-01-465-7754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WS-9273 PC 60

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.