WS-14 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

WS-14: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include bore_diameter: 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN, style_designator: WITHOUT INSERT OR LINER WITH STAKING GROOVE, inner_member_width: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN, outer_member_width: 0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN, end_item_identification: APACHE AH-D64 HELICOPTER, static_radial_load_rating: 90100 POUNDS LBS. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-377-0585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

WS-14

NSN: 3120-00-377-0585
NIINs: 003770585, 010034178, 013425534, 015048008
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)

SPECIFICATIONS

bore_diameter	0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
style_designator	WITHOUT INSERT OR LINER WITH STAKING GROOVE
inner_member_width	0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
outer_member_width	0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
end_item_identification	APACHE AH-D64 HELICOPTER
static_radial_load_rating	90100 POUNDS LBS
outer_member_outside_diameter	1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
general_characteristics_item_description	0.059 IN. ID; 0.125 IN. OD; THD MTG END IN
NSN	3120-00-377-0585

COMPONENT DIAGRAM

KEY FEATURES

•

INNER MEMBER WIDTH: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN

•

OUTER MEMBER WIDTH: 0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: WITHOUT INSERT OR LINER WITH STAKING GROOVE

•

STATIC RADIAL LOAD RATING: 90100 POUNDS LBS

•

BORE DIAMETER: 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN

•

OUTER MEMBER OUTSIDE DIAMETER: 1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

INNER MEMBER WIDTH	0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
OUTER MEMBER WIDTH	0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
STYLE DESIGNATOR	WITHOUT INSERT OR LINER WITH STAKING GROOVE
STATIC RADIAL LOAD RATING	90100 POUNDS LBS
BORE DIAMETER	0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER	1.6245 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

STSKM100-14G1Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy WS-14?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is WS-14?

WS-14 is a BEARING,PLAIN,SELF-ALIGNING.

What parts can replace WS-14?

There is 1 known substitute for WS-14: STSKM100-14G1. Substitute compatibility should be verified for your specific system.

What is the NSN for WS-14?

WS-14 is cataloged in the U.S. Government catalog under NSN 3120-00-377-0585. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

WS-14 — BEARING,PLAIN,SELF-ALIGNING

Request a Quote — WS-14