PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WPP465
WPP465 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 14.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 12.500 INCHES NOMINAL IN, bolt_hole_quantity: 12. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-0763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WPP465
NSN: 5330-00-250-0763
FSC: 5330
CAGE: 79172 — SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter14.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter12.500 INCHES NOMINAL IN
bolt_hole_quantity12
bolt_circle_diameter13.750 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-250-0763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WPP465 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 12
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
BOLT CIRCLE DIAMETER: 13.750 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 14.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BOLT HOLE QUANTITY12
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
BOLT CIRCLE DIAMETER13.750 INCHES NOMINAL IN
OUTSIDE DIAMETER14.750 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER12.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
130194Interchangeable
interchangeable cross-reference
interchangeable
SC130154-1Interchangeable
interchangeable cross-reference
interchangeable
D4R97899-1Interchangeable
interchangeable cross-reference
interchangeable
184Interchangeable
interchangeable cross-reference
interchangeable
CA030124Interchangeable
interchangeable cross-reference
interchangeable
4040-0294Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WPP465?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WPP465?
WPP465 is a GASKET.
What parts can replace WPP465?
There are 7 known substitutes for WPP465: 130194, SC130154-1, D4R97899-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WPP465?
WPP465 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-250-0763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WPP465

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026