PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WPP198
WPP198 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include aperture_width: 2.391 INCHES NOMINAL IN, aperture_length: 3.141 INCHES NOMINAL IN, bearing_surface_width: 0.125 INCHES NOMINAL IN, cross-sectional_thickness: 0.027 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-7500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WPP198
NSN: 5330-00-292-7500
FSC: 5330
CAGE: 79172 — SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS (USA)
SPECIFICATIONS
aperture_width2.391 INCHES NOMINAL IN
aperture_length3.141 INCHES NOMINAL IN
bearing_surface_width0.125 INCHES NOMINAL IN
cross-sectional_thickness0.027 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-292-7500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WPP198 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE LENGTH: 3.141 INCHES NOMINAL IN
•
BEARING SURFACE WIDTH: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
APERTURE WIDTH: 2.391 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH3.141 INCHES NOMINAL IN
BEARING SURFACE WIDTH0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.027 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
APERTURE WIDTH2.391 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2497Interchangeable
interchangeable cross-reference
interchangeable
FF-W-84AInterchangeable
interchangeable cross-reference
interchangeable
D15-739YPC407T0409-411Interchangeable
interchangeable cross-reference
interchangeable
D15-739XPC407T0409-411Interchangeable
interchangeable cross-reference
interchangeable
D15-648YPC407T0409-411Interchangeable
interchangeable cross-reference
interchangeable
10A9294Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WPP198?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WPP198?
WPP198 is a GASKET.
What parts can replace WPP198?
There are 22 known substitutes for WPP198: 2497, FF-W-84A, D15-739YPC407T0409-411 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WPP198?
WPP198 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-7500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WPP198

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026