PartsTable
Technical Data Sheet
Download PDF

WPL22-9 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WPL22-9: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OR STEEL COMP 1050 OVERALL, thickness: 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, hole_diameter: 0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, overall_diameter: 0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-043-1895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WPL22-9
NSN: 5310-01-043-1895
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OR STEEL COMP 1050 OVERALL
thickness0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
hole_diameter0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
overall_diameter0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-043-1895
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WPL22-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 4130 OR STEEL COMP 1050 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 4130 OR STEEL COMP 1050 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
GW502BA9PSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WPL22-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WPL22-9?
WPL22-9 is a WASHER,FLAT.
What parts can replace WPL22-9?
There is 1 known substitute for WPL22-9: GW502BA9P. Substitute compatibility should be verified for your specific system.
What is the NSN for WPL22-9?
WPL22-9 is cataloged in the U.S. Government catalog under NSN 5310-01-043-1895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WPL22-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.