PartsTable
Technical Data Sheet
Download PDF

WNS-832-1 — NUT,PLAIN,WELDING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WNS-832-1: NUT,PLAIN,WELDING.

The NUT,PLAIN,WELDING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 AND STEEL COMP 302 OVERALL, nut_style: PLAIN WELDING, nut_diameter: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-112-1391, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WNS-832-1
NSN: 5310-00-112-1391
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 AND STEEL COMP 302 OVERALL
nut_stylePLAIN WELDING
nut_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
material_document_and_classificationASTM-A582 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763CONDA FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763CONDB FED SPEC 3RD MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-112-1391
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WNS-832-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A582 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763CONDA FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763CONDB FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A582 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763CONDA FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763CONDB FED SPEC 3RD MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
NUT THICKNESS0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEPLAIN WELDING
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
2237582-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WNS-832-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WNS-832-1?
WNS-832-1 is a NUT,PLAIN,WELDING.
What parts can replace WNS-832-1?
There is 1 known substitute for WNS-832-1: 2237582-4. Substitute compatibility should be verified for your specific system.
What is the NSN for WNS-832-1?
WNS-832-1 is cataloged in the U.S. Government catalog under NSN 5310-00-112-1391. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WNS-832-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.