PartsTable
Technical Data Sheet
Download PDF

WNFH — NUT,CLIP-ON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WNFH: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: FLOATING, nut_height: 0.370 INCHES NOMINAL IN, overall_width: 0.570 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC), panel_thickness: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-651-8691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WNFH
NSN: 5310-01-651-8691
FSC: 5310 — Nuts and Washers
CAGE: 0KMA3 — ADAMS NUT AND BOLT CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleFLOATING
nut_height0.370 INCHES NOMINAL IN
overall_width0.570 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
panel_thickness0.040 INCHES NOMINAL IN
special_featuresOVERALL LENGTH: 1.320 INCH NOMINAL;MATT: STEEL ZY IN
thread_directionRIGHT-HAND
nominal_thread_size0.312 INCHES IN
end_item_identification6115-01-591-1161;GENERATOR,HEATING AND AIR CONDITIONER
thread_quantity_per_inch18
distance_from_base_to_center_of_aperture0.860 INCHES NOMINAL IN
NSN5310-01-651-8691
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WNFH · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.860 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
PANEL THICKNESS: 0.040 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT HEIGHT: 0.370 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
DISTANCE FROM BASE TO CENTER OF APERTURE0.860 INCHES NOMINAL IN
OVERALL WIDTH0.570 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
PANEL THICKNESS0.040 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.312 INCHES IN
NUT HEIGHT0.370 INCHES NOMINAL IN
SPECIAL FEATURESOVERALL LENGTH: 1.320 INCH NOMINAL;MATT: STEEL ZY IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT,UNCLIP G5 LONG TYPE
NUT STYLEFLOATING
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WNFH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WNFH?
WNFH is a NUT,CLIP-ON.
What is the NSN for WNFH?
WNFH is cataloged in the U.S. Government catalog under NSN 5310-01-651-8691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WNFH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.