PartsTable
Technical Data Sheet
Download PDF

WMC-00396-113 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

WMC-00396-113: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.930 INCHES NOMINAL IN, first_leg_length: 0.930 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-511-2123, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WMC-00396-113
NSN: 5340-01-511-2123
FSC: 5340 — Hardware, Commercial
CAGE: 7N928 — WAYNE INTEGRATED TECHNOLOGIES CORP. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.930 INCHES NOMINAL IN
first_leg_length0.930 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.110 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.110 INCHES NOMINAL IN
first_leg_thickness0.125 INCHES NOMINAL IN
end_item_identificationAN/GRC - 239
first_leg_hole_diameter0.196 INCHES NOMINAL IN
NSN5340-01-511-2123
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WMC-00396-113 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.196 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.169 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.110 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.110 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: THREE HOLES
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.196 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.169 INCHES NOMINAL IN
SECOND LEG WIDTH1.110 INCHES NOMINAL IN
SECOND LEG LENGTH1.110 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETHREE HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
FIRST LEG THICKNESS0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WMC-00396-113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WMC-00396-113?
WMC-00396-113 is a BRACKET,ANGLE.
What is the NSN for WMC-00396-113?
WMC-00396-113 is cataloged in the U.S. Government catalog under NSN 5340-01-511-2123. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WMC-00396-113

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.