PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WJ16112
WJ16112 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RETAINER AND ROLLERS,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.9996 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, overall_width: 0.7343 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, outside_diameter: 1.3130 INCHES MINIMUM AND 1.3136 INCHES MAXIMUM IN, style_designator: RETAINER AND NEEDLE ROLLERS, retainer_fabrication_method: PRESSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-448-7372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WJ16112
NSN: 3110-00-448-7372
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.9996 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
overall_width0.7343 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
outside_diameter1.3130 INCHES MINIMUM AND 1.3136 INCHES MAXIMUM IN
style_designatorRETAINER AND NEEDLE ROLLERS
retainer_piece_quantity1
retainer_fabrication_methodPRESSED
NSN3110-00-448-7372
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WJ16112 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.9996 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.3130 INCHES MINIMUM AND 1.3136 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RETAINER AND NEEDLE ROLLERS
•
RETAINER PIECE QUANTITY: 1
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.7343 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
BORE DIAMETER0.9996 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.3130 INCHES MINIMUM AND 1.3136 INCHES MAXIMUM IN
STYLE DESIGNATORRETAINER AND NEEDLE ROLLERS
RETAINER PIECE QUANTITY1
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
666163-048Interchangeable
interchangeable cross-reference
interchangeable
809000-392Interchangeable
interchangeable cross-reference
interchangeable
SKA1621Interchangeable
interchangeable cross-reference
interchangeable
646Interchangeable
interchangeable cross-reference
interchangeable
AA1-228Interchangeable
interchangeable cross-reference
interchangeable
2501-1IN RANGEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WJ16112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WJ16112?
WJ16112 is a RETAINER AND ROLLERS,BEARING.
What parts can replace WJ16112?
There are 24 known substitutes for WJ16112: 666163-048, 809000-392, SKA1621 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WJ16112?
WJ16112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-448-7372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WJ16112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026