PartsTable
Technical Data Sheet
Download PDF

WDCL00S1983J99YH — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

WDCL00S1983J99YH: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 8.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-773-0243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WDCL00S1983J99YH
NSN: 3110-00-773-0243
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.1250 INCHES NOMINAL IN
overall_width8.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.3750 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-773-0243
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WDCL00S1983J99YH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.3750 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH8.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER0.3750 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER0.1250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
PS373767-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
373767Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WDCL00S1983J99YH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WDCL00S1983J99YH?
WDCL00S1983J99YH is a BEARING,BALL,ANNULAR.
What parts can replace WDCL00S1983J99YH?
There are 2 known substitutes for WDCL00S1983J99YH: PS373767-1, 373767. Substitute compatibility should be verified for your specific system.
What is the NSN for WDCL00S1983J99YH?
WDCL00S1983J99YH is cataloged in the U.S. Government catalog under NSN 3110-00-773-0243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WDCL00S1983J99YH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.