PartsTable
Technical Data Sheet
Download PDF

WD3L05LR3224U — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

WD3L05LR3224U: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 12.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-2845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WD3L05LR3224U
NSN: 3110-00-198-2845
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width12.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
special_featuresR INGS HEAT STABILIZED T 350 DEGREES
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-198-2845
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WD3L05LR3224U · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH12.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESR INGS HEAT STABILIZED T 350 DEGREES
STANDARD TOLERANCE DESIGNATIONABEC NO.3
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
WD3L05LR3224Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy WD3L05LR3224U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WD3L05LR3224U?
WD3L05LR3224U is a BEARING,BALL,ANNULAR.
What parts can replace WD3L05LR3224U?
There is 1 known substitute for WD3L05LR3224U: WD3L05LR3224. Substitute compatibility should be verified for your specific system.
What is the NSN for WD3L05LR3224U?
WD3L05LR3224U is cataloged in the U.S. Government catalog under NSN 3110-00-198-2845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WD3L05LR3224U