PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WD3204LR5153UP1

WD3204LR5153UP1 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System under NSN 3110-00-580-3069, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WD3204LR5153UP1
NSN: 3110-00-580-3069
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.5
NSN3110-00-580-3069
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WD3204LR5153UP1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS
MATERIALSTEEL BALL
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
INTERNAL CLEARANCE0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
1707InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
16T110InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
70852InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
WD3204LR5153UInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
V3204QS5456U9InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
PS205154InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy WD3204LR5153UP1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WD3204LR5153UP1?
WD3204LR5153UP1 is a BEARING,BALL,ANNULAR.
What parts can replace WD3204LR5153UP1?
There are 7 known substitutes for WD3204LR5153UP1: 1707, 16T110, 70852 and 4 more. Substitute compatibility should be verified for your specific system.
Is WD3204LR5153UP1 still available?
WD3204LR5153UP1 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WD3204LR5153UP1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026