PartsTable
Technical Data Sheet
Download PDF

WCL22-6 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WCL22-6: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OR STEEL COMP 1050 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, recess_depth: 0.062 INCHES NOMINAL IN, hole_diameter: 0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, heat_treatment: QUENCHED AND TEMPERED, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-159-6293, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WCL22-6
NSN: 5310-00-159-6293
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OR STEEL COMP 1050 OVERALL
recess_angle90.0 DEGREES NOMINAL
recess_depth0.062 INCHES NOMINAL IN
hole_diameter0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
heat_treatmentQUENCHED AND TEMPERED
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
recess_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
outside_diameter0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
style_designatorRECESSED
surface_treatmentCADMIUM OVERALL
material_thickness0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5310-00-159-6293
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WCL22-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAT TREATMENT: QUENCHED AND TEMPERED
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
•
RECESS DEPTH: 0.062 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAT TREATMENTQUENCHED AND TEMPERED
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
RECESS DEPTH0.062 INCHES NOMINAL IN
MATERIAL THICKNESS0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
RECESS DIAMETER0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
4D0003-6CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ACL22-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GW502BA6CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy WCL22-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WCL22-6?
WCL22-6 is a WASHER,RECESSED.
What parts can replace WCL22-6?
There are 3 known substitutes for WCL22-6: 4D0003-6C, ACL22-6, GW502BA6C. Substitute compatibility should be verified for your specific system.
What is the NSN for WCL22-6?
WCL22-6 is cataloged in the U.S. Government catalog under NSN 5310-00-159-6293. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WCL22-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.