PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WCE3455
WCE3455 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 1010 OR STEEL COMP 1020 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 1.047 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-264-9532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WCE3455
NSN: 5340-00-264-9532
FSC: 5340
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1010 OR STEEL COMP 1020 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length1.047 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
mounting_hole_size0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
inside_diameter/arch_length0.484 INCHES NOMINAL IN
distance_between_base_and_inside_of_large_arch0.375 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-00-264-9532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: WCE3455 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHION: NOT INCLUDED
•
MOUNTING HOLE SIZE: 0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.500 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.484 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020 LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: ZINC
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONNOT INCLUDED
MOUNTING HOLE SIZE0.200 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
DISTANCE BETWEEN BASE AND INSIDE OF LARGE ARCH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.500 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.484 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1020 LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
SURFACE TREATMENTZINC
OVERALL LENGTH1.047 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
5VB40013-123Upgraded Successor
successor cross-reference
successor
83929-05Upgraded Successor
successor cross-reference
successor
J8124799Interchangeable
interchangeable cross-reference
interchangeable
2874Interchangeable
interchangeable cross-reference
interchangeable
F59241Interchangeable
interchangeable cross-reference
interchangeable
3455Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WCE3455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WCE3455?
WCE3455 is a STRAP,RETAINING.
What parts can replace WCE3455?
There are 19 known substitutes for WCE3455: 5VB40013-123, 83929-05, J8124799 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WCE3455?
WCE3455 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-264-9532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WCE3455

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026