PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WC87038X1MILG15719
WC87038X1MILG15719 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.3860 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-841-0337, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WC87038X1MILG15719
NSN: 3110-00-841-0337
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width0.3860 INCHES NOMINAL IN
outer_ring_width0.4060 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
NSN3110-00-841-0337
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WC87038X1MILG15719 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
INNER RING WIDTH: 0.3860 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15719 MIL SPEC SINGLE MATERIAL RESPONSE
•
SEAL QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
INNER RING WIDTH0.3860 INCHES NOMINAL IN
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15719 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY1
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPELABYRINTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
1076-5Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-70Interchangeable
interchangeable cross-reference
interchangeable
08007Interchangeable
interchangeable cross-reference
interchangeable
B94.9 0-80 UNF HS G H2Interchangeable
interchangeable cross-reference
interchangeable
10182061Interchangeable
interchangeable cross-reference
interchangeable
10765AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy WC87038X1MILG15719?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WC87038X1MILG15719?
WC87038X1MILG15719 is a BEARING,BALL,ANNULAR.
What parts can replace WC87038X1MILG15719?
There are 18 known substitutes for WC87038X1MILG15719: 1076-5, GGG-T-70, 08007 and 15 more. Substitute compatibility should be verified for your specific system.
Is WC87038X1MILG15719 still available?
WC87038X1MILG15719 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WC87038X1MILG15719

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026