PartsTable
Technical Data Sheet
Download PDF

WC1277E3D5A — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

WC1277E3D5A: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: FILLISTER COUNTERSUNK, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, head_height: 0.042 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-536-7045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WC1277E3D5A
NSN: 5306-01-536-7045
FSC: 5306 — Bolts
CAGE: 60516 — WEST COAST AEROSPACE, INC. (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleFILLISTER COUNTERSUNK
grip_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
head_height0.042 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN
head_diameter0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN
thread_length0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
fastener_length0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN
special_featuresINTERNAL DRIVE RECESS PER NAS 1800
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5306-01-536-7045
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: WC1277E3D5A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.042 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-L-87132,TY 1,GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: COTTER PIN HOLE 0.070 INCH DIA AT END OF BOLT 0.106 FROM THE END IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.042 INCHES NOMINAL IN
FASTENER LENGTH0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-L-87132,TY 1,GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.330 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURESCOTTER PIN HOLE 0.070 INCH DIA AT END OF BOLT 0.106 FROM THE END IN
CRITICALITY CODE JUSTIFICATIONAGAV
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 3
3M1277E3D5ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TX1027E3D5XASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11861E3D5ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy WC1277E3D5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WC1277E3D5A?
WC1277E3D5A is a BOLT,CLOSE TOLERANCE.
What parts can replace WC1277E3D5A?
There are 3 known substitutes for WC1277E3D5A: 3M1277E3D5A, TX1027E3D5XA, 11861E3D5A. Substitute compatibility should be verified for your specific system.
What is the NSN for WC1277E3D5A?
WC1277E3D5A is cataloged in the U.S. Government catalog under NSN 5306-01-536-7045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WC1277E3D5A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.