PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WAV 870 ITEM P22
WAV 870 ITEM P22 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include bore_diameter: 130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNINGSELF-ALIGNINGSELF-ALIGNING, overall_height: 85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL MM, surface_finish: GROUNDGROUNDGROUND, style_designator: SPHERICAL ROLLERSSPHERICAL ROLLERSSPHERICAL ROLLERS, self-alignment_location: INTERNALINTERNALINTERNAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-328-3704, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WAV 870 ITEM P22
NSN: 3110-01-328-3704
FSC: 3110
CAGE: 68225 — KARL SENNER, L.L.C. DBA KARL SENNER INC (USA)
SPECIFICATIONS
bore_diameter130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNINGSELF-ALIGNINGSELF-ALIGNING
overall_height85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL MM
surface_finishGROUNDGROUNDGROUND
style_designatorSPHERICAL ROLLERSSPHERICAL ROLLERSSPHERICAL ROLLERS
self-alignment_locationINTERNALINTERNALINTERNAL
overall_outside_diameter270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLESINGLESINGLE
NSN3110-01-328-3704
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: WAV 870 ITEM P22 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPHERICAL ROLLERSSPHERICAL ROLLERSSPHERICAL ROLLERS
•
SURFACE FINISH: GROUNDGROUNDGROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLESINGLESINGLE
•
RETAINER FABRICATION METHOD: MACHINED
•
BORE DIAMETER: 130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: SELF-ALIGNINGSELF-ALIGNINGSELF-ALIGNING
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPHERICAL ROLLERSSPHERICAL ROLLERSSPHERICAL ROLLERS
SURFACE FINISHGROUNDGROUNDGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLESINGLESINGLE
RETAINER FABRICATION METHODMACHINED
BORE DIAMETER130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL130.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL270.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPESELF-ALIGNINGSELF-ALIGNINGSELF-ALIGNING
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL HEIGHT85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL85.0 MILLIMETERS NOMINAL MM
SELF-ALIGNMENT LOCATIONINTERNALINTERNALINTERNAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
P22Interchangeable
interchangeable cross-reference
interchangeable
510-0296-12505-152Interchangeable
interchangeable cross-reference
interchangeable
P492Interchangeable
interchangeable cross-reference
interchangeable
B717197REVBInterchangeable
interchangeable cross-reference
interchangeable
78-36Interchangeable
interchangeable cross-reference
interchangeable
67A311D20-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy WAV 870 ITEM P22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WAV 870 ITEM P22?
WAV 870 ITEM P22 is a BEARING,ROLLER,THRUST.
What parts can replace WAV 870 ITEM P22?
There are 9 known substitutes for WAV 870 ITEM P22: P22, 510-0296-12505-152, P492 and 6 more. Substitute compatibility should be verified for your specific system.
Is WAV 870 ITEM P22 still available?
WAV 870 ITEM P22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WAV 870 ITEM P22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026