PartsTable
Technical Data Sheet
PartsTable / COMPONENT / WAS150
WAS150 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.0465 INCHES MINIMUM AND 0.0515 INCHES MAXIMUM IN, hole_diameter: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, overall_diameter: 0.337 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN, surface_treatment: ZINC OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WAS150
NSN: 5310-00-209-0135
FSC: 5310
CAGE: 21900 — FEDERAL DIV OF VICTOREEN INSTRUMENT CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.0465 INCHES MINIMUM AND 0.0515 INCHES MAXIMUM IN
hole_diameter0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
overall_diameter0.337 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
surface_treatment_document_and_classificationQQ-Z-325,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-209-0135
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WAS150 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.337 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
OVERALL DIAMETER0.337 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.0465 INCHES MINIMUM AND 0.0515 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
60905-1Interchangeable
interchangeable cross-reference
interchangeable
PK50Interchangeable
interchangeable cross-reference
interchangeable
CFR40150Interchangeable
interchangeable cross-reference
interchangeable
JHP33-96Interchangeable
interchangeable cross-reference
interchangeable
9051P5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy WAS150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WAS150?
WAS150 is a WASHER,FLAT.
What parts can replace WAS150?
There are 5 known substitutes for WAS150: 60905-1, PK50, CFR40150 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for WAS150?
WAS150 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WAS150

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026