PartsTable
Technical Data Sheet
Download PDF

WA511PCG — PIN,SHOULDER,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

WA511PCG: PIN,SHOULDER,HEADED.

The PIN,SHOULDER,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, head_style: DEE, first_end_style: SQUARE, special_features: 0.356 IN.DIA HOLE IN SQUARE END IN, style_designator: SHOULDER. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-916-4067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WA511PCG
NSN: 5315-00-916-4067
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07586 — KORNYLAK CORP (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
materialALUMINUM ALLOY OVERALL
head_styleDEE
first_end_styleSQUARE
special_features0.356 IN.DIA HOLE IN SQUARE END IN
style_designatorSHOULDER
first_step_length4.140 INCHES NOMINAL IN
pin_head_diameter1.406 INCHES NOMINAL IN
under_head_length4.687 INCHES NOMINAL IN
second_step_length0.547 INCHES NOMINAL IN
first_step_diameter0.991 INCHES NOMINAL IN
second_step_diameter0.966 INCHES NOMINAL IN
NSN5315-00-916-4067
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: WA511PCG · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 0.991 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE TO FLAT: 0.546 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 4.687 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
SECOND STEP LENGTH: 0.547 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
•
PIN HEAD DIAMETER: 1.406 INCHES NOMINAL IN
•
HEAD STYLE: DEE
TECHNICAL CHARACTERISTICS
FIRST STEP DIAMETER0.991 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE TO FLAT0.546 INCHES NOMINAL IN
UNDER HEAD LENGTH4.687 INCHES NOMINAL IN
FIRST END STYLESQUARE
SECOND STEP LENGTH0.547 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
PIN HEAD DIAMETER1.406 INCHES NOMINAL IN
HEAD STYLEDEE
SECOND STEP DIAMETER0.966 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
WAA511GReference document
Same NSN cross-reference
Reference document — Secondary reference
C313018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WA511PCG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WA511PCG?
WA511PCG is a PIN,SHOULDER,HEADED.
What parts can replace WA511PCG?
There are 2 known substitutes for WA511PCG: WAA511G, C313018. Substitute compatibility should be verified for your specific system.
What is the NSN for WA511PCG?
WA511PCG is cataloged in the U.S. Government catalog under NSN 5315-00-916-4067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WA511PCG