PartsTable
Technical Data Sheet
Download PDF

WA-25704 — BOLT,SHOULDER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

WA-25704: BOLT,SHOULDER.

The BOLT,SHOULDER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, head_style: HEXAGON, head_height: 0.39 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.39 INCHES NOMINAL IN, fastener_length: 2.75 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-609-2625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
WA-25704
NSN: 5306-01-609-2625
FSC: 5306 — Bolts
CAGE: 1G4N4 — WAMORE, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
head_styleHEXAGON
head_height0.39 INCHES NOMINAL IN
thread_class2A A
thread_length0.39 INCHES NOMINAL IN
fastener_length2.75 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentZINC ALLOY OVERALL
width_between_flats1.00 INCHES NOMINAL IN
end_item_identification1670-01-295-8133
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch18
NSN5306-01-609-2625
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: WA-25704 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.39 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.75 INCHES NOMINAL IN
•
THREAD LENGTH: 0.39 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 1.00 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC ALLOY OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.39 INCHES NOMINAL IN
FASTENER LENGTH2.75 INCHES NOMINAL IN
THREAD LENGTH0.39 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS1.00 INCHES NOMINAL IN
SURFACE TREATMENTZINC ALLOY OVERALL
THREAD CLASS2A A
END ITEM IDENTIFICATION1670-01-295-8133
SUBSTITUTES & CROSS-REFERENCES 1
11-1-9451Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy WA-25704?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is WA-25704?
WA-25704 is a BOLT,SHOULDER.
What parts can replace WA-25704?
There is 1 known substitute for WA-25704: 11-1-9451. Substitute compatibility should be verified for your specific system.
What is the NSN for WA-25704?
WA-25704 is cataloged in the U.S. Government catalog under NSN 5306-01-609-2625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — WA-25704

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.