PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W810
W810 ✓ Verified by PartsTable
3M · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK,SCREW is a 3M industrial component. Key specifications include material: STEEL OVERALL, wire_diameter: 0.135 INCHES NOMINAL IN, overall_length: 2.062 INCHES NOMINAL IN, style_designator: ROUND OFFSET BEND, surface_treatment: ZINC OVERALL, nonmachine_thread_style: WOOD SCREW (TYPE WD). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-200-1405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W810
NSN: 5340-01-200-1405
FSC: 5340
CAGE: 73145 — HINDLEY MANUFACTURING COMPANY INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
wire_diameter0.135 INCHES NOMINAL IN
overall_length2.062 INCHES NOMINAL IN
style_designatorROUND OFFSET BEND
surface_treatmentZINC OVERALL
nonmachine_thread_styleWOOD SCREW (TYPE WD)
NSN5340-01-200-1405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W810 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIRE DIAMETER: 0.135 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: ROUND OFFSET BEND
•
SURFACE TREATMENT: ZINC OVERALL
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
TECHNICAL CHARACTERISTICS (FLIS)
WIRE DIAMETER0.135 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORROUND OFFSET BEND
SURFACE TREATMENTZINC OVERALL
OVERALL LENGTH2.062 INCHES NOMINAL IN
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
10480Interchangeable
interchangeable cross-reference
interchangeable
M38527/8-007PInterchangeable
interchangeable cross-reference
interchangeable
43-04-4Interchangeable
interchangeable cross-reference
interchangeable
SF195Interchangeable
interchangeable cross-reference
interchangeable
960025-2Interchangeable
interchangeable cross-reference
interchangeable
X719361 DETAIL 7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W810?
W810 is a HOOK,SCREW manufactured by 3M.
What parts can replace W810?
There are 15 known substitutes for W810: 10480, M38527/8-007P, 43-04-4 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W810?
W810 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-200-1405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W810

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026