W4NY-125-0 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

W4NY-125-0: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.157 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, special_features: EXPLOSIVE ORDNANCE DISPOSAL TOOLS/EQUIPMENT, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-299-1813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

W4NY-125-0

NSN: 5340-01-299-1813
NIINs: 012991813, 014125482
FSC: 5340 — Hardware, Commercial
CAGE: 64678 — DAIMLER TRUCK NORTH AMERICA LLC (USA)

SPECIFICATIONS

diameter	0.157 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
material	PLASTIC POLYAMIDE NYLON BAND
overall_width	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
special_features	EXPLOSIVE ORDNANCE DISPOSAL TOOLS/EQUIPMENT
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
loop_inside_diameter	0.125 INCHES NOMINAL IN
criticality_code_justification	FEAT
material_document_and_classification	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.530 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.303 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
NSN	5340-01-299-1813

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.157 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.530 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.157 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
OVERALL WIDTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.530 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
SPECIAL FEATURES	COLOR NATURAL
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.303 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
MATERIAL	PLASTIC POLYAMIDE NYLON BAND

SUBSTITUTES & CROSS-REFERENCES 2

W4NY-125NAReference document

Same NSN cross-reference

Reference document — Secondary reference

2821G-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy W4NY-125-0?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is W4NY-125-0?

W4NY-125-0 is a CLAMP,LOOP.

What parts can replace W4NY-125-0?

There are 2 known substitutes for W4NY-125-0: W4NY-125NA, 2821G-1. Substitute compatibility should be verified for your specific system.

What is the NSN for W4NY-125-0?

W4NY-125-0 is cataloged in the U.S. Government catalog under NSN 5340-01-299-1813. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

W4NY-125-0 — CLAMP,LOOP

Request a Quote — W4NY-125-0