PartsTable
Technical Data Sheet
Download PDF

W4850696PC4 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

W4850696PC4: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.374 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-179-0989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W4850696PC4
NSN: 5330-00-179-0989
FSC: 5330 — Packing and Gasket Materials
CAGE: 71669 — GENERAL ELECTRIC CO SWITCHGEAR AND CONTROL DIVISION OF APPARATUS GROUP (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.374 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.438 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-179-0989
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W4850696PC4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.438 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.438 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 8
CR79645PC49Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G374921PC50Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
00044Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
PX4293Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM4289Reference document
Same NSN cross-reference
Reference document — Secondary reference
LN20004Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy W4850696PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W4850696PC4?
W4850696PC4 is a SEAL,PLAIN ENCASED.
What parts can replace W4850696PC4?
There are 8 known substitutes for W4850696PC4: CR79645PC49, G374921PC50, 00044 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W4850696PC4?
W4850696PC4 is cataloged in the U.S. Government catalog under NSN 5330-00-179-0989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W4850696PC4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.