PartsTable
Technical Data Sheet
Download PDF

W36231-036 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

W36231-036: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_diameter: 0.250 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, first_counterbore_depth: 0.375 INCHES NOMINAL IN, material_hardness_rating: 70.0 SHORE DUROMETER A NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-495-6118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W36231-036
NSN: 5340-01-495-6118
FSC: 5340 — Hardware, Commercial
CAGE: 75906 — PACIFIC CONSOLIDATED INDUSTRIES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_diameter0.250 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
first_counterbore_depth0.375 INCHES NOMINAL IN
material_hardness_rating70.0 SHORE DUROMETER A NOMINAL
first_counterbore_diameter0.750 INCHES NOMINAL IN
outside/top_flange_diameter1.500 INCHES NOMINAL IN
NSN5340-01-495-6118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W36231-036 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
FIRST COUNTERBORE DIAMETER: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
HOLE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.500 INCHES NOMINAL IN
MATERIAL HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
FIRST COUNTERBORE DIAMETER0.750 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
HOLE DIAMETER0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
9540K36Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy W36231-036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W36231-036?
W36231-036 is a BUMPER.
What parts can replace W36231-036?
There is 1 known substitute for W36231-036: 9540K36. Substitute compatibility should be verified for your specific system.
What is the NSN for W36231-036?
W36231-036 is cataloged in the U.S. Government catalog under NSN 5340-01-495-6118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W36231-036