PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W312PPE5110
W312PPE5110 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 60.00 MILLIMETERS NOMINAL MM, overall_width: 2.1250 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W312PPE5110
NSN: 3110-00-227-3106
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter60.00 MILLIMETERS NOMINAL MM
overall_width2.1250 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresW/O GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeCONTACT
internal_clearance0.0060 INCHES MINIMUM AXIAL AND 0.0080 INCHES MAXIMUM AXIAL IN
lubrication_materialGREASE
NSN3110-00-227-3106
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: W312PPE5110 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 2
•
INTERNAL CLEARANCE: 0.0060 INCHES MINIMUM AXIAL AND 0.0080 INCHES MAXIMUM AXIAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
OVERALL WIDTH2.1250 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0060 INCHES MINIMUM AXIAL AND 0.0080 INCHES MAXIMUM AXIAL IN
SPECIAL FEATURESW/O GREASE PLUG
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BEARING SEAL TYPECONTACT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
405850-53LInterchangeable
interchangeable cross-reference
interchangeable
3110PL0798150Interchangeable
interchangeable cross-reference
interchangeable
25BC33XX3MInterchangeable
interchangeable cross-reference
interchangeable
405850-76BInterchangeable
interchangeable cross-reference
interchangeable
405850-53MInterchangeable
interchangeable cross-reference
interchangeable
30BC33XSS3MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W312PPE5110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W312PPE5110?
W312PPE5110 is a BEARING,BALL,ANNULAR.
What parts can replace W312PPE5110?
There are 30 known substitutes for W312PPE5110: 405850-53L, 3110PL0798150, 25BC33XX3M and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W312PPE5110?
W312PPE5110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W312PPE5110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026